CROSSRUNNER 50 ATV
ReAssembly Guide
Step5-Fig2-Air gage with .5 pound increments
6.
Remove jack or support under front end of ATV and let it rest
on all 4 wheels, release parking brake and roll off metal shipping frame
onto flat, level surface.
7.
Reset the parking brake and perform the final wheel torque
procedure. Torque all lug nuts to 26 Ft/Lbs. using a torque wrench
with the appropriate increments. Proceed in a star or criss-cross
pattern to assure uniform torque results. Install center caps on rear
wheels of ATV. Attach front bumper with bolts provided, if applicable
to your model, taking care to properly snug all bolts adequately and not
over tighten.
Step7-Fig1-Wheel torque
Step7-Fig2-Front bumper mounting
8
