CROSSRUNNER 50 ATV
ReAssembly Guide
9.
Install foam protection pads and cover on center bracket
attached to handle bars.
Step9-Fig1-Install handle bar pad
10.
All ATV’s are shipped with the fuel lines unhooked. Connect the
fuel supply line, coming from the fuel tank, to the fuel inlet port on the
carburetor securing it with the spring clamp provided on the fuel line.
Make sure the fuel line is routed in a manner to avoid kinks and to
allow for the proper gravity feed from the fuel tank. Do not run the fuel
line near any part of the exhaust or hot section of the engine and take
care to tuck it in away from the rider’s feet and legs so that it cannot
be snagged.
Step10-Fig1-Fuel line routing
10
