crosscontrol CCpilot XL, Руководство и справочник пользователя

Страница: 14 / 33

User Manual and Reference Handbook for the CC Pilot™ XL
COM
Marking: COM
Connector Type: DIN M12, 8-pole, A-coded, male.
Pin Signal Description Comments
1 DCD Data Carrier
D
2 RxD Receive data
3 TxD Transmit data
4 DTR Data Terminal
R d
5 GND Signal reference
6 DSR Data Set Ready
7 RTS Request To Send
8 CTS Clear To Send
The COM port follows the RS232 standard except for the “Ring Indicator” signal, which
has been omitted. The supported communication speed for these ports is 2.4 to 115.2
kbps. An eventual cable shield is connected to the M12 connectors cover.
DMI - PC
Marking: DMI
Connector Type: Lemo, female.
Pin Signal Description Comments
1 TXOUT0- LVDS
2 LVDS
3 TXOUT1- LVDS
4 LVDS
5 TXOUT2- LVDS
6 LVDS
7 TXCLK- LVDS
8 TXCLK+ LVDS
9 DMI power
l
+24 V
10 TFT_ON TFT power control
11 Beeper Simple sound unit
12 TS_Tx Touch screen Tx
13 TS_Rx Touch screen Rx
14 SPI_MISO SPI data Display-PC
15 RESET AVR Reset input to AVR Low in, while programming AVR. No
connection in the cable
16 SPI_MOSI SPI data Display-PC
17 SPI_CLK SPI clock Display-PC
18 ON_OFF_2 On/off button from
display to the PC Not implemented
19 GND Ground reference
14