User Manual and Reference Handbook for the CC Pilot™ XL
The USB ports follow the USB 2.0 standard. Due to data communication safety in
rough environments three of the four available USB connectors is limited to full speed
(up to 12 Mbps). If high speed is necessary (up to 480 Mbps) the device must be
connected to the USB 1.
USB connector 1 can supply up to 2A, USB 2-4 can supply up to 500mA each. The
total current of all USB ports 1-4 has a max of 2A. The USB ports are internal over
current and shortcut protected.
An eventual cable shield is connected to the M12 connectors cover.
Ethernet (Ethernet)
Marking: Ethernet
Connector Type: DIN M12 4-pole, D-coded, female
Pin Signal
Description
Comments
1 TX+
2 RX+
3 TX-
4 RX-
With an Ethernet connection, the CC Pilot™ XL can access other units and networks.
The Ethernet connector support 10/100 Mbps, i.e. communication speed up to 100
Mbps.
If shielded Ethernet cable is used the cable shield is connected to the M12 connectors
cover.
Be aware that connecting CC Pilot™ XL to a network environment can impose a
security threat.
12
