Table 2.0 - Model 4116-285-2450 Block Downconverter M&C Commands
x = 3 to select auto reference
x = 2 to select external reference
x = 1 to select internal reference
where:
{aaCEx}
Set 10 MHz reference mode
Range: +2000 to -2000
x = 1 to select RS422
xxxxx = 5 characters
where:
{aaCOxxxxx}
Set Int. 10 MHz reference offset
Range: 00 to 31
xx = 2 characters
where:
{aaCRxx}
Set RS485 address
x = 2 to select RS485
x = 0 to select RS232
where:
{aaC
I
x}
Set Serial Interface
Range: 000 to 300 (00.0 to 30.0 in 0.5 dB steps)
xxx = 3 characters
where:
{aaCGxxx}
Set Gain
Description
Syntax
Command
Table 2.0: Model 4116-285-2450 M&C Commands
4116-285-2450 Manual, Rev. 0
Page 7
02/11/21
