2.3 M&C Commands
The following tables summarize the commands and status queries applicable to the 4116-21T23 frequency
converter.
*
PLEASE NOTE:
The two character {aa} prefix, shown in the table below, is present ONLY when RS485 is selected.
Table 2.1 - Model 4116-21T23 M&C Commands
x = 3 to select auto reference
x = 2 to select external reference
x = 1 to select internal reference
where:
{aaCEx}
Set 10 MHz reference mode
Range: +2000 to -2000
x = 1 to select RS422
x = 0 to unmute the output
x = 1 to mute the output
where:
{aaCMx}
Set Mute
xxxxx = 5 characters
where:
{aaCOxxxxx}
Set Int. 10 MHz reference offset
Range: 00 to 31
xx = 2 characters
where:
{aaCRxx}
Set RS485 address
x = 2 to select RS485
x = 0 to select RS232
where:
{aaC
I
x}
Set Serial Interface
Range: -60 to 00 (00 to -60.0 in 1 dB steps)
xxx = 3 characters
where:
{aaCGxxx}
Set Gain
Description
Syntax
Command
Table 2.1: Model 4116-21T23 M&C Commands
4116-21T23 Manual, Rev. B
Page 7
09/24/15
