2.4 ETHERNET Interface Installation and Operation
The 4115-41-212 Upconverter is equipped with a 10/100 Base-T compatible Ethernet interface for control and
monitoring of its operating parameters. An HTML script interface allows the user to monitor and control the
converter using a standard web browser. SNMP (Simple Network Management Protocol) is also supported.
Contact Cross Technologies for the SNMP MIB file.
2.4.1 Methods of Connection
Directly Connected to a PC:
For control from a local PC, attach the 4115-41-212’s Ethernet port to the Ethernet network connector
on the PC using a crossover RJ-45 cable.
LAN Connection
For LAN connections, attach the 4115-41-212 Ethernet port to the LAN using a normal RJ45 cable.
Use any PC on the LAN to connect to the 4115-41-212.
2.4.2 Ethernet Configuration
Each 4115-41-212 must be configured with an appropriate IP address, Netmask, and Gateway assigned by your
network manager. The 4115-41-212 is set at the factory with a static address that is written on a tag attached to
the unit. The device server in the 4115-41-212 has a built in http based configuration manager that is used to
configure network settings. To access the configuration manager open a web browser and enter the IP address
of the 4115-41-212 in the browser's address field. The window shown in Figure 2-A will appear. As
delivered, there is no password set. Choose your user name and password here or leave those fields blank and
click OK to proceed to the configuration manager web page.
Figure 2-A: Password Screen
4115-41-212 Manual, Rev. B
Page 10
05/07/15
