2.2 M&C Commands
The following tables summarize the commands and status queries applicable to the 4115-41-212 frequency converter.
*
PLEASE NOTE:
The two character {aa} prefix, shown in the table below, is present ONLY when RS485 is selected.
Table 2.0 - Model 4115-41-212 M&C Commands
x = 3 to select band 3: in = (950 to 2050 MHz)
out = (1920 to 2020 MHz)
x = 3 to select auto reference
x = 2 to select external reference
x = 1 to select internal reference
where:
{aaCEx}
Set 10 MHz reference mode
Range: +2000 to -2000
x = 1 to select RS422
x = 0 to unmute output
x = 1 to mute the output
where:
{aaCMx}
Set Mute
xxxxx = 5 characters
where:
{aaCOxxxxx}
Set Int. 10 MHz reference offset
Range: 00 to 31
xx = 2 characters
where:
{aaCRxx}
Set RS485 address
x = 2 to select RS485
x = 0 to select RS232
where:
{aaC
I
x}
Set Serial Interface
Range: 000 to 300 (00.0 to 30.0 in 0.5 dB steps)
xxx = 3 characters
where:
{aaCGxxx}
Set Gain
x = 4 to select band 3: in = (950 to 2050 MHz)
out = (2020 to 2120 MHz)
x = 2 to select band 2: in = (950 to 2050 MHz)
out = (1830 to 1930 MHz)
x = 1 to select band 1: in = (0950 to 1950 MHz)
out = (1770 to 1870 MHz)
where:
{aaCBx}
Set Frequency Band
Description
Syntax
Command
Table 2.0: Model 4115-41-212 M&C Commands
4115-41-212 Manual, Rev. B
Page 7
05/07/15
