Cross Technologies 3116-T31-148, Инструкция по эксплуатации

Страница: 4 / 22

1.2 Technical Characteristics
Technical Characteristics continued on page 5...
3116-T31-148 Manual, Rev. C Page 4 04/22/2015
± 0.01 ppm maximum over temp internal reference.; external reference input Frequency Accuracy
Non-Inverting Frequency Sense
RF Monitor
<45 dBC, @ Maximum Gain Intermod. 2 tone, -5dBm each out
<-50 dBC @ -10 dBm In, 0 Out Spurious, Out of Band Fc±2GHz
-30 to -10 dBm Input Level Range
+10 ±2 dB above Input Level
-60 to 0 dBm Output Level Range
TABLE 1.0 3116-T31-148 Multi-Band Block Translator Specifications**
+4 dBm ± 3 dB; Manual Local/Remote; Auto, Switches to internal when
the external falls below +1 dBm.
10 MHz In/Out Level
Band Specific, fixed frequency LO Frequency
LO Characteristics
± 0.5 dB Frequency Response, 40 MHz
± 2 dB Frequency Response, Band
< 40 dBC, @ -10 dBm In, 0 dBm Out Spurious, Inband, @ in-Level
>45 dB, -60 typical In to Out Isolation, Minimum
+20 to -40 dB; 1±1 dB Gain Range; Steps
+20 ±3 dB Gain, Maximum
Channel Characteristics
+10 dBm @ maximum gain Output 1 dB Compression
See Band Chart Below Frequency (GHz)
50
Ω
/ 10 dB Impedance/Return Loss
Output Characteristics
20 dBm at maximum gain Noise Figure, Maximum
See Band Chart Below Frequency (GHz)
50
Ω
/12 dB Input Impedance/Return Loss
Input Characteristics
80 DUAL 2.05 11.7 - 12.8 13.75 - 14.85
80 DUAL 0.65 7.25 - 7.75 7.90 - 8.40
80 DUAL 2.225 3.7 - 4.2 5.925 - 6.425
3
2
1
PH NOISE
@ 10 kHz # CONV.
(MHz) TRANSLATION
(GHz) OUT RANGE
(GHz) IN RANGE
(GHz) BAND
NUMBER
Band Chart - Frequencies, Translations, Phase Noise
110 95 See Band Chart Below 80 70
1MHz 100kHz 10kHz* 1kHz 100 MHz
dBC/Hz
Phase Noise @ Frequency