2.3 Front Panel Controls and Indicators - The following are the front panel controls and indicators.
MENU
EXECUTE
AGC L=+2 MGC G=+35
REMOTE
POWER
LCD FRONT PANEL DISPLAY
Direct readout LCD
Manual or Remote Selection
S1 - MENU/EXECUTE BUTTON
Press this to get into Program mode
and to execute any changes.
DS6 - POWER LEDS
Green LEDs indicates
presence of DC power.
DS1 - REMOTE LED
Yellow LED indicates
serial remote is enabled.
S2 - MULTI-FUNCTION SWITCH
Vertical toggle switch that controls
values in the Menu items when in
program mode. Does not function
in the normal display mode.
S3 - MULTI-FUNCTION SWITCH
Horizontal toggle switch that
controls which values are being
adjusted. Does not function in the
normal display mode.
-------- CH 1 -------- -------- CH 2 ---------
DS2 - CHANNEL STATUS *
Channels 1, 2, 3, & 4
A
B
1
2
3
4
-------- CH 3 -------- -------- CH 4 ---------
CHANNEL STATUS
MGC G=+20 AGC L=+10
*Channel Status indicators are Green under normal AGC operation. If the input signal falls below the AGC range,
the indicator turns yellow.
FIGURE 2.3 2412-x08 Front Panel Controls and Indicators
(Shown, Model 2412-408 - Four Channel, Front Panel)
2412-408 Manual, Rev. 0
Page 11
09/04/12
