background image

INSTRUCTION MANUAL

MODEL 2116-13T11 Block Translator 

TABLE OF CONTENTS                               PAGE

Warranty

 2

1.0 General

 3

1.1  Equipment Description

 

3

1.2  Technical Characteristics

 

4

2.0 Installation

 5

2.1  Mechanical

 

5

2.2  Rear Inputs and Outputs

 

6

 

2.3  Front Panel Indicators

 

 

6

2.4  Operation

 7

3.0 Environmental Use Information

 

 8

WARRANTY

 - The following warranty applies to all Cross Technologies, Inc. products.

All  Cross  Technologies,  Inc.  products  are  warranted  against  defective  materials  and 

workmanship  for  a  period  of  one  year  after  shipment  to  customer.    Cross  Technologies, 
Inc.’s obligation under this warranty is limited to repairing or, at Cross Technologies, Inc.’s 
option, replacing parts, subassemblies, or entire assemblies.  Cross Technologies, Inc. shall 
not be  liable for  any special,  indirect,  or consequential damages.  This warranty does not 
cover parts or equipment which have been subject to misuse, negligence, or accident by the 
customer  during  use.    All  shipping  costs  for  warranty  repairs  will  be  prepaid  by  the 
customer.  There are not other warranties, express or implied, except as stated herein.

C

ROSS 

T

ECHNOLOGIES, INC.

6170 Shiloh Road

Alpharetta, Georgia 30005

(770) 886-8005

FAX (770) 886-7964

Toll Free 888-900-5588

WEB  www.crosstechnologies.com 

E-MAIL  [email protected]

2116-140T120 Manual, Rev. 0 

 

            Page 2

   

    

8/11/2022

Содержание 2116-140T120










Отзывы: