2.0
Installation
2.1
Mechanical - The 1584-29 consists of one RF printed circuit board (PCB) housed in a 1 RU (1 3/4 inch
high) by 12 inch deep chassis. Redundant, switching, +24 VDC power supplies with the DC output diode OR’d
provide redundant power for the internal and external amplifiers and LEDs. Connectors are type F, female for the
RF connections. The 1584-29 can be secured to a rack using the 4 holes on the front panel. Figure 2.1.shows how
the 1584-29 is assembled. J27 and J25 connect DC Power to the fuses as shown and J30 and J29 connect the DC
voltage from the power supplies to the PCB as shown.
POWER
SUPPLY B
POWER
SUPPLY A
1
2
J27
LNB-1 FUSE
PIN 1, LNB SIDE
PIN 2, +22 VDC SIDE
1
2
J25
2 1
J30
+24, PS B IN
PIN 1, +24 VDC
PIN 2, GROUND
2 1
J29
LNB-2 FUSE
PIN 1, LNB SIDE
PIN 2, +22 VDC SIDE
+24, PS A IN
PIN 1, +24 VDC
PIN 2, GROUND
FIGURE 2.0 1584-29 MECHANICAL ASSEMBLY
1584-29 Manual, Rev C
Page 6
3/7/19
