2.3 Controls and Indicators - The following are the front panel controls and indicators.
S1 - SWITCH RESET
Push-button resets switch to CH1 if it is good and
switch is in LATCH mode. Also resets REMOTE
selection to normal AUTO operation.
S3 - MANUAL SELECT
3-position switch manually selects CH1 or CH2 or
puts the unit in AUTO mode (switch position
determined by Alarm and Remote closures).
DS6 - CH1 ONLINE LED
Lights green when CH1 is
selected.
STATUS
ALARM
HISTORY
SWITCH
MANUAL
SELECT
CH1
AUTO
CH2
CH2
ONLINE
MANUAL REMOTE
SWITCH
RESET
CH1
ONLINE
2
1
2
1
POWER
2
1
DS5 - CH2 ONLINE LED
Lights green when CH2 is
selected.
S2 - HISTORY RESET
Push-button resets ALARM
HISTORY LEDs only.
DS3 - MANUAL LED
Lights red when CH1 or
CH2 is manually
selected (using S3).
DS4 - REMOTE LED
Lights yellow when
remote control is active.
DS8,DS7 - ALARM LEDs
Light red when CH1 or CH2
alarm input is a closure or
open (selectable).
DS1,DS2 - ALM HIST LEDs
Light red on CH1,CH2 alarm,
and stay red until HISTORY
RESET is pressed.
DS9,DS10 - POWER LEDs
Light green when power is
applied to AC1, AC2.
ALARM
HISTORY
RESET
FIGURE 2.3 1582-22L Front Panel Controls and Indicators
1582-22L Manual, Rev. C
Page 7
06/13/11
