NEXUS AM Deactivator
Introduction
v2.1
Page 7 of 26
2.3
Stand-alone usage
The NEXUS AM Deactivator can be used as stand-alone unit. Adjustments for
synchronization, sensitivity and notifications can be made through the Cross Point Device
Explorer software on a laptop/PC.
Figure 2: Field Bus connection
2.4
Field Bus Network structure
The NEXUS AM Deactivator can be int
egrated in Cross Point’s Field Bus network in
combination with NEXUS AM anti-shoplifting systems.
Figure 3: Field Bus structure in combination with NEXUS RF
By connecting the NEXUS AM Deactivator in the NEXUS AM network, reports on
deactivation statistics as well as internet connectivity and remote maintenance can be
enabled. See the “Manual CrossCONNECT Access Point” (www.crosspoint.nl) for further
information.
Ethernet
Field Bus
Device Explorer
Dealer Access Point
AM Deactivator
Device Explorer
CrossCONNECT
Access Point
Ethernet
or LAN
Field Bus
Field Bus
Field Bus
Transceiver
Receiver
AM Deactivator
