Specification
FREQUENCY
:
FM 87.5 -108 MHz
AM 522 - 1710 KHz
POWER SOURCE
:
AC120V~60Hz
ANTENNA
:
EXTERNAL 300 Ohm ANTENNA FOR FM
:
BUILT-IN FERRITE BAR FOR AM
POWER CONSUMPTION
:
110W
AUDIO POWER OUTPUT
:
18W x 2
SPEAKER OUTPUT
:
18W
SPEAKER
:
6 1/2" Dynamic type x 2
:
4ohm 40watt
:
2 1/2" Tweeter type x 2
:
8ohm 10watt
*DESIGN AND SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.
WARNING:
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE. DO NOT REMOVE COVER.
PILOT LAMPS SOLDERED IN PLACE. NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
"Ventilation not to be impeded."
"Do not expose to moisture or liquids. Do not place objects filled with
liquids, such as vases, on the apparatus. "
CAUTION: TO REDUCE
THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE
COVER (OR BACK). NO
USER - SERVICEABLE
PARTS INSIDE. REFER
SERVICING TO QUALIFIED
SERVICE PERSONNEL.
The lighting flash with
arrowhead symbol, within
an equilateral triangle, is
intended to alert user to
the presence of uninsulated
"dangerous voltage" within
the product's enclosure
that may be of sufficient
magnitude to constitute
risk of electric shock
to persons.
The exclamation point
within an equilateral
triangle is intended to
alert user to the
presence of important
operating and
maintenance (servicing)
instruction in the
literature accompanying
the appliance.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
11
1
This jukebox is equipped with external speaker
outputs.
2
The speaker jacks for external speakers are
located on the back of the jukebox. Beside the
speaker jacks is a switch labeled (int./ext./mix).
When using external speakers, this switch must
be switched to the ext. or mix position. The ext.
position will allow only the external speakers to
play. The mix position will allow both the external
and internal speakers to play.
3
If you decide not to use the external speakers,
be sure the switch is on int. or the internal
speakers will not work.
Note: External speakers are not included with the
jukebox.
General
CD Operation
Connecting External Speakers
By selecting Random Mode, the jukebox will
randomly select and play songs from the CD loaded
in the jukebox. To enable Random Play, follow the
steps below.
1
Press RANDOM once to enable random play
mode. "RANDOM" will appear on the display.
2
Press RANDOM again to exit random playing
mode. "RANDOM" will disappear from the
display.
1
To repeat one track, select the track you would
like to repeat and press PLAY/PAUSE.
Press the REPEAT button once. "REPEAT 1"
will show on the display and the selected track
will play repeatedly.
2
To repeat all songs on the CD, press the REPEAT
button the second time. "REPEAT ALL" will show
on the display and the CD will start over once
finished.
3
If you are listening to an MP3 CD with different
albums/folders, you can repeat just the
album/folder that is playing by pressing the
REPEAT button for a third time.
4
To exit repeat mode, press the REPEAT button
for the fourth time."REPEAT" will disappear from
the display.
Note:
Repeat play is disabled while the random
function is being used.
The Intro feature will play the first 10 seconds of
each song on the CD.
1
Once a CD is inserted, press the INTRO button.
The first track will start to play.
2
After 10 seconds, the next track will start to play.
3
Once you reach a track that you want to listen
to, press the INTRO button again. It will exit the
Intro play mode.
Repeat Playing
Intro
Random Playing
Auxiliary Inputs
Using the Aux Input allows you to hook up additional
external audio components and listen to them through
your unit. Any component with an audio output such
as a Tuner, can be connected by using the correct
cables . This unit uses standard RCA cables. Simply
plug the red and white connectors on one end of
the cable to the red and white RCA In jacks on the
back of your unit. The other end of the cable will
plug into the Audio Output jack on the external
component. For more information on hooking up the
external component, see the owner's manual for
that component.
