Programming Stations
1
Press FUNCTION until TUNER appear on the
LCD display.
2
Press BAND to select the desired AM/FM
tuning band.
3
Press and hold the SKIP+ or SKIP - for one
second to automatically tune into to the next
available station with a clear reception signal.
Repeat this procedure until the desired station
is reached.
Basic Operation
1
Press BAND to select the desired AM/FM
tuning band
2
Press SKIP+ or SKIP- to tune to the desired
frequency.
3
Press PROGRAM , the "PROGRAM" and "01"
will start flashing on LCD display.The current
preset number will be displayed for selection.
4
If you wish to store the radio station to another
preset number, press the PRESET-UP or
PRESET-DOWN to select the desired preset
number.
5
Press PROGRAM again to store the
radio station. Repeat steps 3 to 5 to store other
preset radio stations if needed.
6
Once all stations are programmed into memory,
use PRESET-UP or PRESET-DOWN to select
the programmed presets.
**If a button is not pressed within 5 seconds
during programming, the jukebox will
automatically exit program mode.
Note:
A maximum of 30 radio FM stations for
and 10 AM stations can be stored into
memory
Tablet Operation
Tablet Operation
5
8
Radio Operation
POWER
AM/FM
AUX
FIND/ESP. MO./ST.
PRESET -UP
SCAN/SKIP +
SCAN/SKIP -
PRESET -DOWN
PLAY/PAUSE
PROGRAM
INTRO
STOP
4
3
6
0
9
8
7
2
5
1
RANDOM
REPEAT
VOLUME -
BBS
EQ
MUTE
FUNCTION
Control Locators
1
Press FUNCTION until AUX appears on the
LCD display.
2
Pull down the tray and insert the adaptor for AC
charger socket then push closed.
SOCKET
3
Slide the tablet frame to the left to remove.
4
Put the tablet into the tray holder and connect
the 3.5mm AUX cable into headphone jack.
5
Put the frame back and slide to the right to lock
the tablet.
Note:
Crosley has enclosed an
extra 3mm thickness and
1mm-thickness tablet cushioning pad
for users of thinner tablets who need extra cushioning
while the tablet is held by the frame.
Note:
1. Keep the table well
secured against the bracket
while securing the frame.
2. Adjust the tablet volume to
"maximum" prior to locking
it behind the frame
