Crosley cr1101a, Руководство пользователя

Страница: 10 / 18

Acerca de este manual
Gracias por adquirir la unidad Crosley Jukebox
(CR1101A). Lea atentamente este manual antes
de usar esta unidad y consérvelo para consultarlo
en el futuro.
Bienvenido
La unidad Crosley Jukebox
Este manual
Un cable de entrada de 3,5 mm
Un adaptador de CA
Las instrucciones de este manual describen las
funciones de los controles del CR1101A.
Este paquete incluye:
Índice
ESPA OL
25
Inicio
Desembalaje...........………................... 26
Fuente de alimentación........................ 26
Antena.................................................. 26
Ubicación de los controles............... 27-28
Funcionamiento básico
Funcionamiento del CD y el CD MP3... 29
Reproducción de carpetas en CD MP3. 29
Saltar hacia delante y hacia atrás......... 29
Reproducción aleatoria......................... 29
Funcionamiento de la radio................... 29
Reproducción programada.................... 30
Reproducción de CD con repetición..... 30
Funcionamiento de la línea de entrada. 30
General
Guía de solución de problemas............ 31
Garantía................................................ 32
ENGLISH
8
1
Press the PROGRAM BUTTON [PROG]. The
LED indicator light will flash and The LED
DISPLAY will show “
P01 ”.
2
Press the FORWARD SKIP BUTTON or the
REVERSE SKIP BUTTON to select the
desired track you wish to program into memory.
3
When the desired track number is displayed,
press the PROGRAM BUTTON again to store
the selected track. The LED DISPLAY will
change to “
01 ”, indicating it is ready for the
second track you wish to program into memory.
4
Repeat steps 2-3 to program further tracks into
memory.
5
Once all desired tracks are programmed into
memory, press the PLAY/ PAUSE BUTTON
to begin playback of programmed tracks. Adjust
the Volume.
6
Programming will be erased when the CD DOOR
is opened or the STOP BUTTON
is pressed
twice .
Notes: For CD - a maximum of 20 tracks can be
programmed to play in any order.
For MP3 - a maximum of 99 tracks can be
programmed to play in any order.
1
To repeat a Single Track: Select the track you
want to repeat and press the PLAY/PAUSE
BUTTON
to begin playback. Then press the
REPEAT BUTTON once.
2
The REPEAT INDICATOR will flash and the
selected track will repeat at the end of the song.
3
To repeat All Tracks on a CD Folder: As above
for 1 track, but press the REPEAT BUTTON
twice . The REPEAT INDICATOR will stay on
and once finished, the whole CD, etc. will play
again. To turn the Repeat function off, press the
REPEAT BUTTON again.
Repeat CD Playback Programmed Playback
LINE IN OPERATION
You can connect an external audio player to this unit
and play the music through its speakers.
1
Switch the LINE IN SWITCH on the rear panel
to the ON position.
2
Plug the Auxiliary cable into the 3.5mm dia. LINE
IN JACK on the rear panel of the unit.
3
Plug the other end of the auxiliary cable into the
output jack of your external device, e.g. the
headphone socket of an ‘i’ product, Mobile
Phone, Cassette Player, etc. and switch this on.
4
Play the music and adjust the volume level of
your external component. Check the user manual
of the external player for its correct operation.
NOTE: When not using the Line-in function,
make sure the LINE IN SWITCH is set to OFF.
Basic Operation