Crosley Furniture CO7180, Руководство по сборке

Страница: 4 / 15

Step 1. Lay back panel (part C) upside down on a soft flat surface, such as carpet, as shown below.
Attach right arm panel (part A) and left arm panel (part B) to back panel (part C) using long bolts
NOTE: Please do not fully tighten bolts until unit is fully assembled.
S x12
T
x6
R x6
Step 2. Attach seat panel (part D) to right arm panel (part A), left arm panel (part B) and back panel
(part C) using long bolts (part R), flat washers (part S), hex nuts (part T), allen wrench (part U)
NOTE: Please do not fully tighten bolts until unit is fully assembled.
4
(part R), flat washers (part S), hex nuts (part T), allen wrench (part U) and wrench (part V).
U x1
V x1
S x12
T
x6
R x6
U x1
V x1
and wrench (part V).