Croplands PEGASUS 4000, Руководство по эксплуатации и обслуживанию

Страница: 38 / 168

3.12 Pegasus BT-POM 1212 - Rev 3
Sprayer Operation
Unique parallelogram boom lift - low position.
Boom Adjustment - 24 to 30m
Boom Set-Up - 24-30
metre
The Compact boom hydraulically side
folds and locks for transport. Unique
parallelogram boom lift and suspension
with hydraulic accumulator protects the
boom and improves boom ride.
Adjustable boom breakaways with 90°
self-returning boom ends and self levelling
are standard.
Optional Hydraulic wing lift and/or
independent wing-fold wing electric/
hydraulic solenoid valves and an in-cab
control are options (see page 2.14).
Boom set-up requires:
1. Wing alignment.
2. Wing extension alignment.
3. Balancing device alignment.
4. Backlash between sliding surfaces
alignment.
5. Locking the balancing device
adjustment.
To set-up the boom for operation, follow
the instructions for the 21, 24, 28 and 30
metre compact booms and for the 33 &
36 metre booms.
1. Wing Alignment
Wings are aligned to the central frame
via the adjusting rods (C) shown in figure
1 (above).
To align wings:
1. Release pressure from the shock
absorbers (A) shown in figure 2
(above right).
2. Align the wings by adjusting the
cylinder rods shown in figure 1.
3. Once aligned, tighten the lock
nuts on the cylinder rods.
4. Adjust the shock absorbers (A), shown
in figure 2 above, as follows:
i) Tighten cap (B) against the limit
stop (D) until springs are slightly
pressurised.
ii) Tighten the lock nut when adjustment
is finalised.
Unique parallelogram boom lift - high position.
The initial boom alignment is carried
out at the factory and checked by your
dealer.
NOTE