Potential Transformer Digit Edit.
Pressing the “
Adjust” key will scroll the value of the most
significant digit from 0 through to 9 unless the presently
displayed potential transformer ratio together with the full
scale current value, previously set, would result in a maximum
power of greater than 360 Megawatts in which case the digit
range will be restricted.
Pressing the “>> Next” key accepts the present value at the
cursor position and advances the cursor to the next less
significant digit.
(* Denotes that decimal point will be flashing).
Note: the flashing decimal point indicates the cursor position, a steady decimal point will be present to identify the
scaling of the number until the cursor position coincides with the steady decimal point position. At this stage the
decimal point will flash.
When the least significant digit has been set pressing the “>> Next” key will advance to the
“Potential Transformer Ratio Confirmation” stage.
Screen showing display of 0.120 kV i.e. 120 Volts indicating steady decimal point and cursor
flashing at the “hundreds of volts” position.
Potential Transformer Ratio Confirmation.
This screen will only appear following an edit of the Potential
Transformer ratio.
If the scaling is not correct, pressing the “
Adjust” key will
return to the “Potential Transformer Ratio Edit” stage with the
digits flashing indicating that the multiplier (decimal point
position) should be selected.
Pressing the “>> Next” key sets the displayed value and will
advance to the “Demand Integration Time” menu. (See
Section 5.2.3 Demand Integration Time Edit).
18
