5 Programming
The following sections comprise step by step procedures for configuring the Switchboard 1540
for the individual user requirements.
To access the set-up screens press and hold the “
Adjust” and “>> Next” keys simultaneously
for 5 seconds. This will take the user into the password protection entry stage. (See Section 5.1
Password Protection). To return to the display screens at anytime during these procedures,
press the “
Adjust” and “>> Next” keys simultaneously for 5 seconds.
5.1 Password Protection
Password protection can be enabled to prevent unauthorised access to set-up screens, by
default password protection is not enabled.
Password protection is enabled by selecting a four digit number other than 0000, setting a
password of 0000 disables the password protection.
Enter Password, prompt for first digit.
(* Denotes that decimal point will be flashing).
Press the “
Adjust” key to scroll the value of the first digit
from 0 through to 9, the value will wrap from 9 round to 0.
Press the “>> Next” key to advance to the next digit.
In the special case where the Password is “0000” pressing the
“>> Next” key when prompted for the first digit will advance
to the “Password Confirmed” screen.
Enter Password, first digit entered, prompt for second digit.
(* Denotes that decimal point will be flashing).
Press the “
Adjust” key to scroll the value of the second
digit from 0 through to 9, the value will wrap from 9 round to
0.
Press the “>> Next” key to advance to the next digit.
13
