CRM 30L, Руководство пользователя

Страница: 4 / 12

®
Make the most of your outdoor living space and enjoy a warm shower thanks to sun’s energy.
Instrucciones
Instructions
3
INSTALLATION
CONTROL KNOBS POSITION
Cold
Hot
H
c
c
H
MIXER TAP POSITION
MANUAL FOR THE INSTALLATION, USE AND MAINTENANCE
MANUAL PARA LA INSTALACION, USO Y MANTENIMIENTO
6. Drill 4 holes of 60 mm of depth using the base of the shower and marks
as a reference.
7. Take the bag with the screws, insert 4 expansion plugs into holes.
8. Bring the shower back to its vertical position, on top of the holes you just
made. Hold the shower, by the front with the hand, while you place the
screws into holes and tight them slightly with the other hand. This way we
will avoid the shower to move.
9. Once the 4 screws are in, grab a wrench and finish tightening the screws.
Do not overtighten, they may crack.
10. Make sure the solar shower is perpendicular to the ground.
11. Let the water run before attaching the connecting tube to the main water
supply to prevent clogs in any part of the system caused by sediment from
the water system that could be introduced into the shower’s pipe system.
12. Connect the Solar Shower to the main water supply with a 1/2” flexible
connector. Tighten it with the hand. A quick connect adaptor can be used for
the water inlet.
13. Open the hot water knob until water comes out from the showerhead.
This way we will know that the tank is full.
14. Close the hot water knob and the shower will be ready to use. The water
will take a few hours to heat up for the first time. Afterwards, while you use
the shower, it fills up and it warms up at the same time.
Turn on the cold water first, then adjust the water temperature. If you start
opening the hot water first, you may get scalded!
MIXING TAP POSITION