CONTROLS AND COMpONENTS:
pistol Driver
1. Snap Chuck
2. Worklight
3. LED Battery Indicator Lights
4. LED Battery Level Indicator Button
5. Forward/Reverse Switch
Accessories
6. AC Adaptor/Charger
Visit us at
crlaurence.com
for international toll free information 4
A
C.R. LAURENCE Co., INC.
GENERAL SAFETY RULES
CHARGING THE BATTERY
1. Place the tool on a clean dry surface within 3 feet (1 m) of an outlet.
2. Plug AC Adaptor into the charging port located on the back of the unit.
3. Allow 5 to 7 hours for the battery to fully charge.
4. When the battery has fully charged, disconnect the charger from the power supply.
5. The LED battery level indicator tells you the amount of charge that you have on the battery.
6. When all three lights (RED, YELLOW and GREEN) are illuminated, the battery is functioning at
full capacity.
7. When two lights (YELLOW and RED) are illuminated, this indicates that the battery capacity
is beginning to diminish.
8. When only one light (RED) is illuminated, this indicates that the battery capacity is low and
the unit needs to be charged.
1
2
5
3
4
6
