7
GB
Setting headband length
You can use the setting dial to smoothly adjust
the helmet to your head circumference in order
to ensure an optimal fit of the helmet. Turn the
dial left to loosen the headband of the helmet,
and right to tighten the headband (Fig. D).
Setting headband height
The height of the headband system can be set
separately. There are 3 different possible height
settings.
Pull out the comfort padding fastened to the
back of the helmet with Velcro. Pull out the
connecting pins of the headband system from
the locking points in the ABS bowl (Fig. F). You
can now fasten the pins of the headband system
higher or lower in the other locking points. Press
the pins firmly enough into the locking points that
they audibly and tangibly lock in place. Both
pins must always be locked. Place the padding
as shown in Fig. F.
Removable ear padding
(Fig. E)
Pull hard on the ear padding until the tabs of
the ear padding have loosened from the helmet.
Open up the chin strap and remove the ear
padding. To apply the ear padding pull the ends
of the opened chin strap through the loops of the
ear padding, and insert the tabs into the helmet
slot until they audibly lock. Pay attention to the
left and right marking (L/R) on the respective ear
pad.
Maintenance and care
Regular maintenance and cleaning contributes
to the safety and preservation of the skateboard.
• Carefully rub away stubborn stains with a
soft cloth, lukewarm water and a pH-neutral
cleaning agent.
• The padding can be cleaned with a little soap
and a soft brush.
• IMPORTANT! Never clean the product with
harsh cleaning agents.
Inner padding
• Hand wash up to 30 °C.
30 °C/86 °F
• Let dry at room temperature.
Transportation
Transport the helmet in a box to protect it from
being crushed (e.g. in a suitcase or boot of a
car).
Storage
When not in use store the helmet in the bag
provided and in a dry, well ventilated area at
room temperature. Avoid heat sources.
Disposal
Dispose of the article and the packaging materi-
als in accordance with current local regulations.
Packaging materials such as foil bags are not
suitable to be given to children. Keep the pa-
ckaging materials out of the reach of children.
Dispose of the products and the
packaging in an environmentally
friendly manner.
The recycling code is used to identify
various materials for recycling.
The code consists of the recycling
symbol – which is meant to reflect the recycling
cycle – and a number which identifies the
material.
Notes on the guarantee and
service handling
The product was produced with great care and
under constant supervision. You receive a three-
year warranty for this product from the date of
purchase. Please retain your receipt.
The warranty applies only to material and
workmanship and does not apply to misuse or
improper handling. Your statutory rights, espe-
cially the warranty rights, are not affected by
this warranty. With regard to complaints, please
contact the following service hotline or contact
us by e-mail. Our service employees will advise
as to the subsequent procedure as quickly as
possible.