Crivit 322296 1901, Руководство по эксплуатации

Страница: 27 / 114

■ 24 │
GB
│
IE
CEB 2000 A1
Trimming the insoles to size
IMPORTANT
The heating element is located in the region of the toes .
► Under no circumstances should you cut within the warning
symbol
,as this may damage the heating element .
♦ First, select the shoes in which you wish to wear the insoles .
Bear in mind that the insoles are ca . 4 mm thick and that
the better the shoe is insulated against cold, the longer you
can heat with a single battery charge .
♦ The trim marks for different shoe sizes are printed on the
bottom of the insoles and serve only as a guide for trimming .
♦ Initially, trim the insoles slightly larger than needed . Deter-
mine the required actual size by using an existing insole .
♦ Cut along the trim marks and adjust the insole at the
heel and sides to your individual size .
NOTE
► In the final state the insole should fill the entire foot bed
and it not be possible for it to move in the shoe .
Charging the battery pack
The battery packs are charged via the supplied power adap-
ter . For safe and faultless operation of the appliance with the
electrical connection, observe the following instructions:
IMPORTANT
► Before connecting the appliance, compare the connection
data (voltage and frequency) on the rating plate with that of
your mains power supply . This data must be compatible to
avoid possible damage to the device .
► Ensure that the mains power cable is not damaged and that
it has not been laid over hot surfaces and / or sharp edges .
► Ensure that the mains power cable is not overtaut or kinked .
► Do not let the power cable hang over edges (trip wire effect) .
♦ Plug the power adapter into a mains power socket . Ensure
that the battery packs are switched off (function indicators
do not glow) .