© 2020 All rights reserved. Data subject to change without notice.
27
Rev. B | 2020.07
cGas Detector Analog Transmitter - Operation Manual
7.4 Display Settings
The LCD display can display up to 2 lines of 16 characters. The backlight can be
turned off, but in normal operation, as configured from the factory, the display
is backlit. After warm up and upon normal operation, the display will show the
current gas level reading for each channel that it has been configured.
Pressing the UP or DOWN button allows you to scroll through a series of
information screens showing the model name, serial number and firmware
version; the gas type and AD counts; the channel number, gas type and gas
level; and temperature and relative humidity (if option is installed).
7.4.1 Adjust Display Brightness
The brightness of the display and the information displayed can be changed as
per your preference.
From the main display, press ENTER.
Enter passcode 1014 using the UP button and ENTER button.
Enter Password
1014
Press ENTER to access the Display Menu.
DisplayMenu
Press Enter
Brightness
100
Press ENTER. Use the UP button to change the numeric value. Move to the next
digit by pressing ENTER. When finished, press ENTER to confirm and Exit.
Brightness
>050
Confirm?
50
N
>Y
NOTE:
You cannot enter a number higher than 100. Entering a value of 000
turns the backlight off completely. With ambient light the text can still be read
on the display.