Cristec CPS3 12V/80A, Руководство пользователя

Страница: 22 / 76

CPS3-3M-DED
22
3.3. SELECTION WHEEL AND SWITCH SETTINGS – ADJUSTMENT - INDICATORS
3.3.1. Description
The CPS3 chargers are equipped with a selection wheel (RC1) allowing to set up the charger
according the battery type and the application.
Setting thanks to a small flat head screw driver (width 2,5mm) and turn in clockwise direction.
The CPS3 chargers are equipped with a Boost function for a faster charge ofthe batteries. This
function is controlled by a timeout (see table here after) and is automatically inhibited when the
battery is fully charged : stoppage ofthe boost for I batteries < 15% ofI rated charger.
The Boost function can also be disabled by means ofa switch (SW1).
Setting by selecting the switch
SW1 : Selection of the BOOST function
3.3.2. Setting according to the batteries type
(*) Voltage on BAT 1 / BAT 2 with 10% ofthe rated current and a tolerance of+/- 1%.
The voltage on +BATD is lower than 0,2V (approx.) at 10% ofthe charger rated current and 0,4V (approx.) at
100% ofthe charger rated current.
The voltage on +SP is higher than 0,3V (approx.) at 10% ofthe charger rated current and 0,4V (approx.) at 100%
ofthe charger rated current.
RC1: Selection of the load curves
RC1
www.busse-yachtshop.de | info@busse-yachtshop.de