CRIOCABIN ELISIR 200, Инструкция по эксплуатации

Страница: 29 / 36

ELISIR
29
5.2 Uses to be avoided
5.3 Working limits
Refer to the enclosed "Control unit instructions for use" .
5.4 Cabinet control functions
Here are the cabinet control functions reckoned among the Customer’s common skills:
• cabinet switching on;
• manual defrosting of the evaporator;
• setting temperature;
• periodical cleaning and maintenance;
• cabinet switching off.
To carry out the listed control functions, refer to the enclosed "Control unit instructions for use" .
5.4.1 Manual defrosting
In order to avoid ice formation on the evaporator and consequent reduction of cold air flow, the unit
has an automatic system that will defrost the cabinet periodically, whose daily frequency has been preset
by the Manufacturer during the testing procedure.
In case of an anomalous reduction of the refrigerated air flow, the manual defrosting of the cabinet
must be carried out.
Note!
Front glasses must be lifted to their maximum opening point and kept open only as long
as it takes to store or remove food, or for cleaning purposes. Pistons act as a lifting back-
up and prevent the glass from accidental falling.
If cabinets are provided with hatches, these must be opened only as long as it takes to
store or remove food in order to avoid an anomalous rising of the cabinet working tem-
perature.
Prohibition!
Do not set temperatures lower than those recommended for the cabinet category. This
would not bring any advantage and may block the evaporator.
Do not store goods over the maximum load line. This may cause ice formation on the
evaporator, which may damage the thermal conditions of the correctly stored products.
Do not obstruct the air inlet grille located in the display surface front side.