OPERATING INSTRUCTIONS - ALARM
Pre-Warning Shock Protection
PM
PRE-WARN
The Pre-warning (warn-away) feature will activate when a low-level shock or vibration
detected by the system’s shock sensor. The alarm will chirp the siren 5 times and
flash the lights once to help deter any further tampering with the vehicle. The
pager/remote will vibrate twice and beep (15X’s).
Passive Arming Mode: (Programmable)
Passive (automatic) arming occurs 30 seconds after the ignition is turned off and the
last door is closed. Upon closing the last door, the unit will flash the lights twice and LED will be flashing
rapidly to confirm passive countdown. If a door is reopened within the 30 second period, the countdown stop
and begin again when the door is closed. Passive arming provides failsafe protection in case you forget to
arm the system.
Passive Locking: (Programmable)
PM
PASSIVE LOCK/ARM
The CS2016FM system can be programmed to passively lock the doors when the
system passively arms. The default setting is OFF because passive locking
increases the risk of locking the keys in the vehicle. When the system arms/locks
passively, without you pressing the remote, the LCD pager will still provide a
confirmation signal. The LCD screen will have an arrow only without a lock symbol.
Trunk/Hatch Pop (Optional, Remote AUX. Output 1)
This feature is designed to interface with existing Factory power trunk or power
hatch release systems and may require additional parts and/or labor charges.
Press and release Button #3 (Trunk) on the transmitter to pop/open the trunk/hatch.
If the system is armed, it will also disarm when the button #3 is pressed. The LCD
pager/remote will confirm with 3 beeps and the trunk icon on the screen.
PM
TRUNK POP
Remote AUX. Output 2 (Optional, Requires special programming)
This system contains a second auxiliary output to activate other accessories or devices. To activate the
systems’ Second Auxiliary Output, press and HOLD Button #3 (Trunk Symbol) on the transmitter for more than
2 seconds. This is a momentary output that will stay active as long as the remote button is held down. There
is no LCD/pager confirmation for Aux. 2 output.
Dome Light Illumination (Optional)
This feature will turn on the vehicle’s dome light upon disarming for 30 seconds or until the key is inserted and
turned on. This will provide illuminated entry to your vehicle in dimly lit areas for safety and security.
7
