CrimeStopper The Informer II CS-2016FM Скачать руководство пользователя страница 6

OPERATING INSTRUCTIONS - ALARM 

 

Disarming While Tripped (Triggered): 

Disarming the System while it is triggering requires TWO presses of the #2 Unlock Button.  The first press of 
Button #2 Resets the alarm cycle only (system still armed) while a second press will disarm/unlock the system. 

 

Selective Silent Arming/Disarming: 

To Arm or Disarm the system without siren 
chirps, press and release both Buttons #2 
(Unlock) and #4 (Start) at the same time.  
System will Arm or Disarm without siren chirps.  
Flashing lights and LED will be the only 
indicators of Arm/Disarm status.  The LCD will 
Display a musical note with an “X” when the 
system is armed or disarmed without a chirp. 

PM

 

SILENT ARM 

PM

 

SILENT DISARM

 

Prior intrusion Alert 

This system will notify you if the alarm was tripped while you where away.  Upon disarming, the two normal 
disarm chirps will be heard then the system will emit 4 additional siren chirps.  Check your vehicle for any 
signs of a break in or tampering.  Also see LED Diagnostics Section to determine the cause of the trigger. 

 

Remote Panic Protection 

To sound the alarm in an emergency situation or to draw attention to your vehicle, press 
and hold Button #1 (Lock) for at least 3 seconds until the siren sounds.  Press Button #2 
(Unlock) to reset panic mode.  The LCD pager/remote will display a “P” and emit 15 
beeps when the panic mode is triggered. 

PM

P

 

PANIC MODE 

 

Selective Shock Sensor Disable 

To arm the alarm and bypass shock sensor protection, press Button #1 as normal then 
press and release Button #1 and #2 together within 2 seconds.  You will hear 3 extra 
siren chirps indicating shock sensor bypass for this arming cycle only.  This feature can be used when parking 
near railroad tracks, airports, or area with excessive loud machinery or noise to prevent the nuisance of 
unnecessary false alarms. 

 

Open Door Alert / Bypass 

Upon arming, this system will warn you if a door is left open.  The LCD pager will vibrate and beep (15X’s) 
along with displaying the open zone on your LCD screen.  This zone will automatically be bypassed until 
closed, otherwise the alarm will continue to protect all other zones. 

6

 
 

Содержание The Informer II CS-2016FM






















Отзывы: