CrimeStopper REVO-1 Series, Инструкция по эксплуатации

Страница: 4 / 8

4
BATTERY REPLACEMENT
To Replace the Battery on 3 and 4 button remote:
The Remote Control uses two CR-2025 Lithium 3 Volt Batteries. Simply remove the Phillips screw located behind
key ring (see diagram below). Use a small screw driver as shown in Figure 2 to remove the back cover. Slide old
batteries out. Insert the new batteries into plastic cover and slide into place with the (+) end facing up. The plastic
cover keeps the batteries from shorting out against the side of metal housing.
VEH
CR2025
Remove
Screw