This system performs the following tasks by pressing one of the buttons on the hand-held transmitter:
•
ARM / LOCK
•
DISARM / UNLOCK
•
TRUNK POP
•
REMOTE START
•
PANIC
Note: You may not have all of the available features depending on your particular installation. Some features
require additional parts and/or labor.
#3
#1
TRANSMITTER BUTTONS
#2
#4
START
ARM/
TRUNK
REMOTE
START
UNLOCK
LOCK
DISARM/
POP
ARMING:
Press the arm/lock button on the transmitter. You will hear a single siren chirp and the lights will flash once. The
red LED in the vehicle will start flashing. The system will arm, the doors will lock (optional feature) and the starter
will be disabled (optional feature). If after a 5 second delay there is an intrusion or disruption to the vehicle body,
the alarm will sound with siren, lights and honking horn for 45 seconds (
Horn does not sound with shock sensor
activation).
If a low-level shock to the vehicle body is detected, the pre-warning sensor activates sounding 6
quick siren chirps and 1 light flash. If a higher-level shock is detected, the siren will sound continuously and the
lights will flash on and off for 45 seconds. Turn the sensor control knob clockwise to increase sensitivity and
counter-clockwise to decrease sensitivity.
DISARMING:
Press the disarm/unlock button on the transmitter. You will hear 2 siren chirps and the lights will flash twice. The
dome light turns on and the dash LED stops flashing. If the alarm had triggered in your absence, you will hear 3
siren chirps.
OPERATION
6
