background image

OPTION PROGRAMMING 

 

1. HORN CHIRPS / PULSES 

This option controls the system’s Horn-honk output.  There are 3 selections: Button 1 (Lock) = Horn Pulse only 
when alarm is tripped.  Button 2 (Unlock) = Horn Chirps for Arm / Disarm and Pulse when tripped.  Buttons 
(1+2) = Horn Chirps for Arm, Disarm, and Pre-warning protection.  The horn output pulses when triggered. 

 

2. PASSIVE ARMING / CHIRP COUNTDOWN 

This option controls the Passive (Automatic) Arming feature.  If ON, arming will occur 30 Seconds after the 
ignition is turned off and the last door has been closed.  The LED will begin flashing rapidly while counting 
down.  If a door is reopened, the system will wait (LED solid) for the door or zone to close before arming.  The 
unit will chirp once and flash the lights once. Doors will lock if passive locking is selected.  Factory default 
setting is OFF.  If Passive Chirp countdown is selected, the System will produce a siren chirp every 2 seconds 
during countdown until the system arms. 

 

3. PASSIVE LOCKS 

This option controls whether the doors will lock when Passive Arming occurs

.  Note: This feature may 

increase the risk of locking keys in the vehicle.

 

 

4. IGNITION-CONTROLLED LOCKS 

This option controls whether the locks are controlled by Ignition.  There are 3 selections: Button 1 (Lock) = 
Lock/Unlock with vehicle Ignition.  Button 2 (Unlock) = No ignition locks.  Buttons (1+2) = Ignition lock only. 

 

Doors will not lock if they are open to prevent locking the keys in

.

 

 

5. 10/60 Sec. DOOR OPEN WARNING 

This setting changes the delay time in which the alarm system begins to monitor the Door circuit.  This option 
can prevent the alarm from giving warning chirps on vehicles with a delayed dome light. 

 

6. ACTIVE RE-ARMING 

Active Re-arming allows the system to re-arm itself 30 seconds after disarmed with the transmitter if a door 
has not been opened.  This is handy if the vehicle is accidentally disarmed (via the Transmitter in your pocket) 
without you knowing it.  If Chirp Countdown selected the system will chirp every 2 seconds during the 30 
second count down to active re-arming. 

 

7. DOUBLE UNLOCK PULSE 

The unit will send 2 unlock pulses when the #2 Unlock button is pressed.  This feature may be required for 
interfacing this alarm with an existing Factory Keyless Entry or Alarm system in a vehicle.  These systems are 
found on some Nissan, VW, Toyota, and Lexus vehicles. 

9

 

Содержание CS-2000.III

















Отзывы: