OPTION PROGRAMMING
1. Turn the Ignition ON and press the Override/Program button 5 times. After a slight delay, the system will flash the
lights 5 times.
2. Within the next few seconds, press the Override/Program button [again] the number of times that corresponds to
the feature list below. The siren will chirp for each button press. DO NOT LOSE COUNT!!
3. When you get to the desired option number, press the appropriate button on the transmitter according to the chart
below. Turn Ignition off. See Below for Option numbers, descriptions, and values. (Button 1 gives a single light
flash/chirp, Button 2 gives two light flashes/chirps, and Buttons (1+2) together gives three light flashes/chirps.)
4. Change ONE option at a time repeating steps 1-3 as needed. When you are finished customizing options, check
operation to see if the option(s) have changed.
PROGRAMMING OPTIONS CHART
* = Default Settings
Option # Option Description
BUTTON 1
LOCK
BUTTON 2
UNLOCK
BUTTONS (1+2)
TOGETHER
1.
Factory Horn Chirps / Pulses
Pulse with trip
only
Arm/Disarm Chirps
& Pulse with trip
Arm/Disarm/Warn Chirp &
Pulse with trip *
2.
Passive Arming /
Passive Chirp Countdown
ON
OFF*
Passive Arm with
Chirp Countdown
3.
Passive
Lock
ON
OFF*
4.
Ignition controlled Locks
ON*
OFF
Ignition Lock Only
5.
10/60 Sec. Door Open Warning
10 Sec.
60 Sec.*
6.
Active
Re-Arm
Enabled*
Disable
7.
Double Unlock Pulse
Disabled*
Enable
8.
Silent
Arm/Disarm
(Chirp Defeat w/Button 1)
Disabled*
Enable
9.
Parking Lights on with disarm
Enabled*
Disable
10.
Disarm with trunk pop
Disable
Enabled*
11.
Silent Arm/Disarm with Remote
(Button #2)
Enabled*
Disable
12.
Door Lock Pulse Time
0.75 Sec.*
3 Sec.
13.
Type of Carjack Protection
Active*
Active & Passive
Full-Time
14.
Carjack Features Enable/Disable
Disabled*
Enable
15.
L/UL or Arm/Disarm w/IGN ON
Lock/Unlock*
Arm/Disarm
NOTE: Options can be instantly restored to Factory Default Values: To restore default values: Perform step #1 above,
then press buttons (1+2) together. The siren will chirp 4 times and lights will flash 4 times. Turn OFF Ignition. All
programming options should be restored to “*” values (See chart above).
8
