background image

 

10 

CONVENIENCE AND SAFETY FEATURES 

 

KEYLESS ENTRY (POWER DOOR LOCK CONTROL, Optional)  

This system enables you to remotely lock and unlock the vehicle’s doors (if equipped with power locks) via remote control 
for safety and convenience.  Note: This feature may require extra labor and/or parts to install.  Press the Lock or Unlock 
transmitter button as you leave or come near the vehicle.  Parking lights will flash once for lock and twice for unlock.  If 
vehicle is running by the remote start system, the lights will flash, but return back to solid. 

 

AUTO LOCK/UNLOCK (Option # 2) 

The Auto Lock feature controls whether the doors will automatically lock/unlock on your vehicle when driving or with turning 
the Ignition ON/OFF.  If the Auto Lock feature is turned on, and your system is in “Tach” mode, then the doors should 
automatically lock as the engine RPM’s increase (driving).  If the Auto Lock feature is turned on, and your system is in 
“Smart Tachless” mode, then the doors will lock a few seconds after the Ignition is turned on.  When the Auto Lock feature is 
turned on, the system will always unlock the doors when the Ignition is turned off.  With this feature turned OFF, the system 
will not automatically lock or unlock the vehicle.  See your installer for programming information on this feature.

 

 

DOOR LOCK NOTE:

 If your system has been setup with an optional starter kill relay, but you do not have power door locks, 

note the following: The lock and unlock buttons on the remote control must still be utilized to operate the Starter disable. 

 

REMOTE PANIC (Optional)  

For personal safety this unit now includes a panic feature.  To sound the vehicle car horn, press the Lock Button on the 
remote for more than 2 seconds.  The vehicle horn will honk along with flashing parking lamps for 1 minute. Reset Remote 
Panic by pressing either the lock or unlock button.  See next section for Horn Honk information. 

 

HORN CHIRP/HONK OUTPUT (Option # 7 & 13)  

This feature, if installed, will provide audible confirmation chirps from the factory horn for lock and unlock. When using this 
feature, pressing the Lock or Unlock button a 2

nd

 time within 3 seconds or once (programmable option) will provide a horn 

chirp for audible confirmation.  The system can also be programmed to provide 3 chirps when a remote start is requested 
using the remote.  Note: Horn honk/chirp feature may require extra labor and/or parts to install. 

 

REMOTE TRUNK RELEASE OR DOMELIGHT ILLUMINATION (Optional) Applies to RS-4 

This  CoolStart  system  includes  an  output  that  can  be  programmed  to  remotely  release  a  factory  electronic  trunk  or 
illuminate the interior light when you unlock your vehicle for lighted entry at night.  If you have the optional trunk pop 
installed, simply press and release the Trunk Button #3 on the transmitter or if option # 6 is turned on you must press Button 
# 3 twice within 3 seconds, to remotely open trunk. If your system is programmed for Dome Light illumination, then it will 
work automatically lighting the dome light for 30 seconds when you unlock your vehicle via the remote.  The dome light will 
turn off after 30 seconds, or turning the key on (whichever comes first).  The trunk Pop or Dome Light Illumination may 
require extra labor and/or parts to install. 

Содержание Cool Start RS-7

















Отзывы: