background image

Page  4

“Quick Reference”   of   Transmitter   Functions

   The “Arm” Button

    Pressing and releasing
the Arm Button will arm
the system. Pressing
and holding this button
3 seconds will activate
Remote Panic which
will leave the system
armed when stopped.

Blue Light

Illuminates whenever any transmitter button is pressed.

The “Disarm” Button

 Pressing and releasing the
   Disarm Button will disarm

the system.  Pressing  and
  holding this button 3
    seconds will activate
 Remote Panic which will
leave the system armed.

Your system can be operated by
two transmitters. Replacement
transmitters, if needed, are avail-
able from where you purchased
your system, or from Omega-
see page 22.

 Button 3

Pressing and releasing the
Small Button two times will
arm or disarm the system
without chirps.  Upon arming,
pressing and releasing this
button will turn off the built-in
shock sensor.

Button 4

Can be used with

optional Rec-43 to

operate an auxillary

channel

Page  21

Step 1: After ensuring the system’s Blue wire is non-grounded, remove and then

restore power to the system.  The siren will chirp once, and the parking
lights, if connected, will flash 6 times.

Step 2: Immediately upon the single siren chirp, press and release

Button 3 on the first transmitter.  The system will respond with one chirp.

Step 3: Within 6 seconds, press and release  Button 3 on the second

transmitter to be programmed.  The response will be one, then another
chirp, which indicates both transmitters have been programmed, and
the system is exiting Transmitter Programming Mode.

Should only one transmitter be programmed, after 6 seconds of no programming
activity the system will sound two chirps and automatically exit Transmitter Pro-
gramming Mode.  Also, if only one transmitter is programmed, one preexisting
transmitter code will be retained.  Should it be desired to purge the preexisting
code, simply program the single new transmitter twice into the system.

by unplugging, then plugged back together, the system’s 9-wire harness, or by
removing and then restoring the Blue 15 Amp fuse on the system’s Red main
power wire, which is also located at the control unit and siren assembly.  The
Crime Guard 250i6 may be operated by up to two transmitters.

Содержание Crime Guard 250i6



















Отзывы: