Cricut Cake Personal Electronic Cutter, Руководство пользователя

Страница: 24 / 24

24 ENGLISH
Troubleshooting
TIP: For our complete list of frequently asked questions, plus the latest updates to the
User Manual, visit
www.cricutcake.com
.
Problem: The cutting mat won’t load when I push the
Load Mat
key.
Solution: Try pushing the cutting mat slightly into the roller bar as you press the Load
Mat
key.
Problem: The cutting mat didn’t load when I pushed the
Load Mat
key. And now, when
I try to push it again, it doesn’t do anything.
Solution: You need to press
Unload Mat
first. Your Cricut Cake™ machine “thought”
that it loaded the mat, even if it didn’t pull it in. The machine needs to be given the
command to unload before another load attempt is made. Pressing the
Unload Mat
key will reset the roller bar, allowing for another load attempt.
Problem: The blade is not cutting all the way through the material.
Possible Solution 1: Increase the cut pressure. Do this with the Pressure Dial found on
the left side of the front of the Cricut Cake machine. See page 21.
Possible Solution 2: The cutting blade may dulled by use and need replacement. Refer
to the “Replacing the Cutting Blade” section on page 21.
Problem: The material lifts off the mat as the Cricut Cake machine is cutting.
Possible Solution 1: Make sure you press the material firmly onto the cutting mat when
setting up the cut.
Possible Solution 2: Try using more shortening on the mat.
Problem: I can’t get characters to cut out with the Creative Feature selected.
Solution: Some characters don’t work with all of the Creative Features available on
a font or shape cartridge. Refer to the Icon Gallery in the cartridge handbook to see
which features work with which characters.
Problem: I’ve placed a smaller size of material on the mat and navigated to the upper
right corner of the cutting mat, but when I cut characters, the blade returns and starts
cutting back at the top of the cutting mat.
Solution: After you’ve navigated to the upper right corner using the Blade Navigation
Buttons, and prior to pressing
CUT , you need to press the Set Cut Area key. This will tell
the Cricut Cake™ machine that you have selected a smaller paper size. Otherwise,
the machine “thinks” that a full sheet of material (either 12" x 12" [30.48 cm x 30.48 cm]
or 12" x 24" [30.48 cm x 60.96 cm], depending on the cutting mat) is loaded.