Cricket Remote Control Installation
1. Set the Remote Control Enable Switch to “ON”. Located under the
Front seat near the Freewheel Electronic Switch.
2. Check that the Electronic Brake Switch is set to “Off”.
3. Check the Key Switch and make sure it is in the “OFF” position.
4. Set the Forward / Reverse Switch on the Dash to “Forward”
5. Using the Remote press “C” to turn the Cart “ON”. You will see the
battery meter light come on.
6. Using the Remote press “D” to select Forward or Reverse. When
Reverse is active you will hear the Cart beep. Press “D” again to
place the Cart in Forward. The Reverse beeper will turn off.
7. Using the Remote press “ B” to engage the pre-set throttle and move
the Cart. Stop pressing “B” to stop the Cart’s movement.
8. Once you are done loading or unloading the cart press “C” to turn off
the Remote Control system.
9. Set the Remote Control Enable Switch to “OFF”.
Remote Control Operation
2
Rev 01222019 © 2020 Melbourne Cricket