Crevalle Boats 24 Bay Скачать руководство пользователя страница 97

Страница: 97 / 147

Exterior Equipment

10.6 Canvas T-Top (Optional)

The optional canvas T-top is equipped with an

acrylic canvas top laced to a welded anodized or

powder coated aluminum frame that is bolted to

the console and cockpit sole. It is equipped with a

storage compartment, switch panel and overhead

lighting for the helm.

The top is designed to accommodate radio anten-

nas, forward and aft spreader lights, navigation/

anchor lights and rod holders. It could also be

equipped with optional outriggers.

The hardtop is not designed to support the ad-

ditional weight of heavy items like a life raft.

Electronics antennas must be mounted to the top

between the front and rear legs in the mounting

areas provided. Do not mount any antennas or

equipment to the brow area forward of the front

legs. The hardtop frame is not designed to support

the weight of accessories in this area and could be

damaged. The rear legs provide the wire chase

for lights and antennas mounted to the top.

10.7 T-Top/Hardtop (Optional)

The optional T-top with a fiberglass hardtop con

sists of a laminated fiberglass top mounted to

a welded anodized or powder coated aluminum

frame that is bolted to the console and cockpit

sole. It is equipped with a storage compartment,

switch panel, and overhead lighting for the helm.

The top is designed to accommodate radio anten-

nas, radar antennas, forward and aft spreader

lights, navigation/anchor light and rod holders. It

could also be equipped with optional outriggers.

The hardtop is not designed to support the addi-

tional weight of heavy items like a life raft. Radar

and electronics antennas must be mounted to the

top between the front and rear legs in the mount-

ing areas provided. Do not mount any antennas

or equipment to the brow area forward of the

front legs. The hardtop frame is not designed to

support the weight of accessories in this area and

could be damaged. The rear legs provide the wire

chase for lights and antennas mounted to the top.

10.8 Mister System (Optional)

High pressure misting nozzles could be incorpo-

rated into the hardtop frame above the helm.

When activated by a switch in the hardtop switch

panel, a dedicated booster pump supplied by the

freshwater system delivers a continuous supply of

water at high pressure to the nozzles. The system

produces an ultra fine water mist that significantly

lowers the temperature at the helm.

Refer to the mister system operation manual for

additional information and instructions for the

mister system.

Typical T-Top/Hardtop

Содержание 24 Bay




















































































































































Результаты поиска

Содержание 24 Bay

Отзывы:

Похожие инструкции для 24 Bay

Бренды по названию

Популярные бренды

Crevalle Boats 24 Bay, Руководство пользователя

Результаты поиска

Содержание 24 Bay

Отзывы:

Похожие инструкции для 24 Bay

Бренды по названию

Популярные бренды