Video Card for TPS/Lectern Panel
Crestron
TPS-VIDL-1/TPS-VIDL-2
Remove Touchpanel Rear Cover
5. Refer to the following diagram. Using a #1 Phillips
screwdriver, loosen and remove the
two
screws that secure the
PCB blank plate and remove the plate.
Remove PCB Blank Plate
6. As shown in the diagram after this step, align the pins on the
touchpanel interface connector of the TPS-VIDL-1/VIDL-2
with the touchpanel motherboard connector.
8
•
Video Card for TPS/Lectern Panel: TPS-VIDL-1/TPS-VIDL-2
Operations & Installation Guide - DOC. 6070