Crestron TPS-G-TPI, Руководство по эксплуатации

Страница: 25 / 66

Crestron Isys
®
TPS-G-TPI G-Series Touchpanel Interface
QM 1 Setup Details
QM 1 SETUP
SCREEN
CONTROLS
DESCRIPTION
Auto Compensation
Disable
Turns off auto compensation.
Auto Compensation
Enable
Turns on auto compensation. When auto compensation is enabled,
the QM receiving device uses the auto compensation data received
from the QM-Video preset matching the transmitter's QM ID..
Video Puts the menu in Video mode so that you can adjust the Peak,
Boost, Skew Red, Skew Green and Skew Blue signals for Video.
S-Video Puts the menu in S-Video mode so that you can adjust the Peak,
Boost, Skew Red, Skew Green and Skew Blue signals for S-Video.
Component Puts the menu in Component mode so that you can adjust the
Peak, Boost, Skew Red, Skew Green and Skew Blue signals for
Component video.
RGB Puts the menu in RGB mode so that you can adjust the Peak,
Boost, Skew Red, Skew Green and Skew Blue signals for RGB
video.
QM 1 Preset Displays the current QM 1 Preset number. Saved presets can also
be called up using this control. Plus and minus buttons increment
the displayed value.
Load Preset Will load the selected QM 1 Preset.
Store Preset Will store any changes you’ve made to the QM 1 setup at the
displayed preset number.
Restore Default QM
Settings
Restores the QM settings to their original defaults.
Peak Peak adjusts for high frequency attenuation that can occur over
long cable lengths.
Boost Boost compensates for overall signal loss that can occur over long
cable lengths.
Skew Red Adjusts the timing position of the red signal on the skew test pattern
to compensate for any losses caused by long cable runs.
Skew Green Adjusts the timing position of the green signal on the skew test
pattern to compensate for any losses caused by long cable runs.
Skew blue Adjusts the timing position of the blue signal on the skew test
pattern to compensate for any losses caused by long cable runs.
Operations Guide – DOC. 6445 Isys
®
G-Series Touchpanel Interface: TPS-G-TPI ¥
21