Crestron TPS-G-TPI, Руководство по эксплуатации

Страница: 12 / 66

G-Series Touchpanel Interface Crestron Isys
®
TPS-G-TPI
PC to TPS-G-TPI Cable Specifications (Crestron Cable Number STCP-502PC)
LAN
LAN One 8-wire RJ-45 connector with two LED indicators (green LED indicates link
status, yellow LED indicates Ethernet activity). This connector provides an Ethernet
10baseT /100baseTX, full duplex, TCP/IP, UDP/IP, CIP, IEEE 802.3U compliant
network connection.
Network Connector Pinout
PIN SIGNALS
1 TX +
2 TX -
3 RC+
4
N/C
5 N/C
6
RC -
7 N/C
8
N/C
24VDC
One 24 Volt DC power jack (PW-2420RU power supply sold separately) powers
the TPS-G-TPI interface in lieu of Cresnet power.
NET
The four-pin 5 mm detachable terminal block provides communication with and
power from a Cresnet control network. For additional details, refer to “Network
Wiring” on page 11. A cable for this connection is provided with the interface.
Pins 24 and G provide 24 VDC and ground respectively. Power supply CNWPS-75
OR C2N-SPW5300 can be used to power the TPS-G-TPI.
Pins Y and Z provide communications (data).
¥ Isys
®
G-Series Touchpanel Interface: TPS-G-TPI Operations Guide – DOC. 6445 8