Crestron TPS-6X Series, Руководство по эксплуатации, Страница: 49 / 66

Crestron TPS-6X Series Isys 5.7” Wireless Touch Screens
Operations Guide – DOC. 6875C Isys 5.7” Wireless Touch Screens: TPS-6X Series • 45
RF or IR Operation
Using VT Pro-e, the TPS-6X can be set to communicate via either RF or IR. This
selection is made using the Panel Type drop down menu at the time a new TPS-6X
project is created, as shown in the following illustration.
VT Pro-e New Project Window (Showing Selection of Panel Type)
The
TPS-6X
project type, when loaded, places the TPS-6X into an RF only mode.
The TPS-6IR project type places the TPS-6X into an IR only mode.
When in IR only mode, the RF is turned off and does not function. In this mode,
there is no RF radiation present.
The IR ID information must be set to match the program. This is done on the
“WIRELESS SETUP” menu (refer to “WIRELESS” which starts on page 26) and in
the SIMPL Windows program (refer to “Programming with SIMPL Windows”
which starts on page 38).
Multi-Mode Objects
Multi-mode objects offer high-
performance programming!
The single most advanced VT Pro-e high performance programming technique
involving the TPS-6X is the concept of multi-mode objects. A multi-mode object
(such as a button or legend) is an object drawn on a VT Pro-e page that can have one
or more active and inactive visible settings ( modes ).
For examples, refer to www.crestron.com/exampleprograms and search for
multi-mode object examples. This file contains the VT Pro-e touch screen files and
SIMPL Windows files that illustrate the high-performance capabilities of multi-mode
objects.