Crestron TPMC-8X-GA, Руководство по эксплуатации

Страница: 29 / 66

Crestron TPMC-8X-GA Isys
®
8.4” WiFi Touch Screen
From either the numeric or the symbol keyboard, touch the key to
return to the alpha keyboard.
The initial position of the on-screen keyboard is determined by the VT Pro-e
program or SIMPL Windows settings. The on-screen keyboard defaults to its largest
size.
In use, when the on-screen keyboard is moved and/or resized and then closed, it
re-opens in the same position it was in and at the same size it was when closed. This
position and size remain in memory until the touch screen is re-booted or it is re-set
by the SIMPL Windows program. After reboot, the position of the on-screen
keyboard reverts to the defaults set in the VT Pro-e or SIMPL Windows program.
The size reverts to the largest as determined by the firmware installed in the touch
screen.
Exit the on-screen keyboard by selecting by touching the red close button in the
upper right corner of the keyboard window. If the
Keyboard button on the start
menu is still visible, it can also be touched to exit the keyboard.
Diagnostic
Touch Diagnostic to display the firmware version number, view Installed Packs and
to reset the end user license from the “Diagnostics” window.
“Diagnostics” Window
Reset CTP Port resets the default value of the CTP port to 41795, for terminal
connection using Crestron Toolbox.
To configure the appearance of popup messages and passcode messages, touch
Configure Messages . The “Message Configurations Properties” window opens.
Operations Guide – DOC. 7078E Isys
®
8.4” WiFi Touch Screen: TPMC-8X-GA
•
25