Crestron ST-PC, Руководство по эксплуатации

Страница: 6 / 24

Dual AC Power Control Module Crestron ST-PC
AC power is supplied via a 3-wire line cord (no plug on the STI-PC configuration).
This power is solely for the purpose of powering the loads attached to the POWER
A and B ports.
Specifications
The following table provides a summary of specifications for the ST-PC module.
ST-PC Specifications
SPECIFICATION DETAILS
Power Requirements 6 Watts (.25A @ 24VDC) - Cresnet
or 0.5A @ 12 VDC external power supply
(PW-1205 supplied with ST-PC, PWI-1210
supplied with STI-PC)
Default Net ID 2C
Ratings (per relay) 120 V, 10 A Tungsten Load (ST-PC)
250 V, 5 A Tungsten Load (STI-PC)
Total Combined Unit Load Not greater than 10 A (ST-PC)
Not greater than 6 A (STI-PC)
Control System Update Files
1, 2, 3
2-Series Control System Version C2-2.000.CUZ or later
CEN/CN-TVAV
CNMSX-AV/PRO Version 5.10.13V.UPZ or later
Version 5.01.35X.UPZ or later
CNRACKX/-DP Version 5.01.35W.UPZ or later
ST-CP Version 4.02.04S.UPZ or later
Ports/Connectors
NET
POWER A
Two 6-pin, RJ type connectors
One 3-pin AC connector (ST-PC)
One 3 conductor, six-foot cable (STI-PC)
POWER B One 3-pin AC connector (ST-PC)
One 3 conductor, six-foot cable (STI-PC)
12 VDC, 0.5A One – Male receptacle for external power pack
POWER IN One 3-conductor cable
Rack Space 1 unit high, ½ unit wide
Environmental Temperature 41° to 113°F (5° to 45°C)
Environmental Humidity 10% to 90% RH (non-condensing)
Dimensions & Weight Height:
Width:
Depth:
Weight: 1.70 in (4.32 cm)
7.07 in (17.95 cm)
6.32 in (16.06 cm)
2.70 lb (1.15 kg) ST-PC
2.80 lb (1.30 kg) STI-PC
1. The latest software versions can be obtained from the Downloads | Software Updates section of the
Crestron website (
www.crestron.com ). Refer to the note that follows.
2. Crestron 2-Series control systems include the AV2, CP2/CP2E, MP2/MP2E, PAC2, PRO2 and
RACK2.
3. Filenames for CNX and ST-CP update files have a UPZ extension. Files on the website may be .zip
or self-extracting .exe files containing the .cuz or .upz file. To avoid program problems, make sure
you are using the update file with the correct suffix letter (e.g., S, V, W, X).
2
•
Dual AC Power Control Module: ST-PC Operations Guide – DOC. 5708A