Crestron ST-IO, Руководство по эксплуатации

Страница: 20 / 24

Input/Output Module Crestron ST-IO
Upload via Crestron Viewport
1. Verify that the procedure for “Communication Settings” that begins on
page 13 has been performed.
2. As shown after this step, select File Transfer | Send Program
(Alternatively, press Alt+P ) from the Viewport menu.
File transfer | Send Program Command
3. The “Send Program” window appears as shown after this step. Click
Browse , locate the completed file (.spz for PRO2) and click Open . This
displays the program’s header information and enables one or both of the
What to Send check boxes. If the program does not contain any SIMPL+
modules, only the SIMPL Program check box is enabled. If it does contain
SIMPL+ modules, then the SIMPL+ Program(s) check box will also be
enabled. Select one or both check boxes and then click Send Program to
begin the transfer.
NOTE: Refer to the respective Operations Guide for control system details about the
other fields in the “Send Program” window.
“Send Program” Window
4. To verify that the program has been transferred successfully, select
Diagnostics | Report Program Information . This should display a
window that provides details about the current program loaded into the
control system.
16
•
Input/Output Module: ST-IO Operations Guide - DOC. 5675A