Crestron ST-DSN, Руководство по эксплуатации

Страница: 8 / 16

Docking Station Crestron ST-DSN
DC Power Connector Port
The DC power connector port is used to supply 12VDC power via the external
power pack.
ST-DSN Power Port
Power
Connector
Side View
Bottom View
ST-DSN Indicators
Three LED indicators are located on the front panel of the ST-DSN. Refer to the
illustration and descriptions after this paragraph.
ST-DSN Indicators
RDY CHG
(Power)
Illuminates green when power is provided to the ST-DSN via the external power
pack.
CHG (Charge)
Illuminates when a ST-BTPN is inserted in the ST-DSN cavity and their contacts
meet. The LED remains ON while the rechargeable battery pack is charging.
If the CHG LED blinks every second, it is in a "charge pending" state. This state
indicates that the rechargeable battery pack may be too hot or cold, or that it has
extremely low voltage and a “trickle charge” is necessary before a fast charge can be
applied. In either case, the ST-DSN monitors the ST-BTPN status and waits for the
correct conditions to start a fast charge. The LED remains ON during a fast charge.
RDY (Ready)
Illuminates when the ST-BTPN in the ST-DSN cavity is fully charged.
4
•
Docking Station: ST-DSN Operations Guide – DOC. 6095