Crestron ST-DSN, Руководство по эксплуатации

Страница: 10 / 16

Docking Station Crestron ST-DSN
NOTE: For more information on charging times, refer to the latest revision of the
Rechargeable Battery Pack Operations & Installation Guide (Doc. 6088),
“Specifications” section.
NOTE: Make sure that the contacts of the ST-DSN and ST-BTPN touch. The CHG
LED illuminates while the ST-BTPN is charging. When the ST-BTPN is fully
charged, the CHG LED goes out and the RDY LED illuminates.
Method 1: ST-BTPN Alone
NOTE: Use the optional charging guide when charging the ST-BTPN alone (while
it is not installed in the touchpanel).
Position the charging guide into the ST-DSN cavity. Position the ST-BTPN, by
itself, into the ST-DSN cavity to automatically initiate charging. Refer to the
illustration below to confirm positioning.
Charging the ST-BTPN (Alone)
CHG RDY
DO NOT
PLACE METALLIC OBJECTS (COINS, PAPER CLIPS, ETC.) OR LIQUIDS
IN THIS AREA; PRODUCT DAMAGE WILL RESULT.
O
NLY USE THE POWER PACK SPECIFIED FOR THIS UNIT.
B
ATTERY GUIDE
MUST
BE USED WHEN CHARGING BATTERY OUTSIDE TOUCH PANEL.
Crestron Electronics, Inc.
C R E S T R O N
Rockleigh, NJ 07647
Contacts
ST-BTPN
RECHARGABLE
POWER PACK
ST-DSN SHOWN
WITH CHARGING GUIDE
Bottom view
Flip battery to install
Method 2: ST-BTPN Installed in an Inactive Touchpanel
NOTE: Do not use the optional charging guide when charging the ST-BTPN while
installed in the touchpanel.
NOTE: This method only applies to the ST-1550C and ST-1700C wireless
touchpanels.
In this method, the ST-BTPN is properly installed into the touchpanel. Position the
touchpanel into the ST-DSN cavity, as shown on the next page. As long as the
touchpanel remains inactive (OFF), a fully discharged ST-BTPN fully charges in 2.7
hours.
6
•
Docking Station: ST-DSN Operations Guide – DOC. 6095