CRESTRON
Operations Guide - DOC. 5729
Slide Controller: SP-SC
••
5
SP-SC with CNMSX
The SP-SC can be used with a variety of Crestron systems, including the CNMSX.
When used with a CNMSX there are additional hardware requirements.
•
A specially designed Serial Data Cable is required (p/n
CNSP-112
).
•
An external power supply is required. Refer to "Specifications" on
page 2 for part number and input/output voltage specifications.
Connect the stereo plug of the CNSP-112 into the input port of the SP-SC. Connect
the Phoenix type connector to of the CNSP-112 to one of the Infrared – Serial output
ports on the CNMSX.
To program the CNMSX for the Slide Controller, refer to Crestron's SIMPL
™
Windows
®
programming software (v 1.20.04 or later) and the latest version of the
Crestron Database (v 11.7.207).
NOTE:
An external power supply must be used when using the SP-SC with the
CNMSX system. A CNSP-112 Serial Data Cable is also required.
Connect to CNMSX
Serial Data Cable
CNSP-112
To Slide Projector
S
G
Serial Data Cable
CNSP-112
External
Power Supply
