background image

                                                                               CRESTRON                                                                                      

Operations Guide  - DOC. 5729

Slide Controller: SP-SC  

••

  7

Problem Solving

Troubleshooting

TROUBLE

POSSIBLE 

CAUSE(S)

CORRECTIVE ACTION

SP-SC not 
functioning.

SmartPresenter

Q-Code incorrect

Verify that the correct Q-Code for the 
device has been assigned.

SmarTouch ST-CP 
/CMMSX

Incorrect Driver 
Selected

No 12v power supply

Select the correct driver from the 
Crestron database.

12v  power supply must be used
(see "Specifications" on page 2).

Further Inquiries

If after reviewing this Operations Guide, you cannot locate specific information or
have questions, please take advantage of Crestron's award winning technical support
team by calling:

 

In the US and Canada, call Crestron’s corporate headquarters at
1.888.CRESTRON [1.888.273.7876] or 1.201.767.3400.

 

In Europe, call Crestron International at +32.15.50.99.50.

 

In Asia, call Crestron Asia at +852.2341.2016.

 

In Latin America, call Crestron Latin America at +525.574.15.90.

For local support from exclusive Crestron factory trained personnel call:

 

In Australia, call Soundcorp at +613.941.61066.

 

In New Zealand, call Amber Technologies at +649.410.8382.

Содержание SP-SC















Отзывы: